.jpeg)
Decoration
Double air inlet, allowing higher flow inhalations, making easier to breathe.
Antiallergic.
The mask is fitted with two carbon filters and a exhaling valve.
Suitable to be used in atmospheres contaminated with fumes and vapours with a boiling point over 65 degrees Celsius, like solvents and paints, offering a proper protection (with oxygen content in the air over 17% in volume).
Mask with double charcoal filter against organic and solvent fumes.
Facial housing of thermoplastic rubber.
Elastic tape fastener.
Each of the built-in chemical filters of the mask is classified as “filter against fumes, A type, class 1” according to EN 141, and are also certificated separately.
| Resistance to breathing. Sinusoidal flow. 25 cycles/min. 2 L/stroke | On inhalation: 2 mbar |
| Resistance to breathing. Sinusoidal flow. 25 cycles/min. 2 L/stroke | At exhalation: 3 mbar |
| Resistance to breathing. To continuous flow inhalation. At 30 L/min. | 0.50 mbar |
| CO2 content (dead space) | 1.00 % |
| Leakage to the outside (Hermeticity) | <5% |
| Regulations | UNE EN-140:1999 |
| Regulations | UNE EN-141:2001 |
| Health and Safety Requirements | R.D. 1407/1992 |
| Control organism | Nº 0159 |
| Certificate | 21211404 |
